Pressure Cracking.

Pressure Crack Test

A crack test is used to find the opening pressure of a check valve or similar item. It is especially useful in testing devices that have a small amount of weepcrack_graph (small leak) before the full opening.The test is performed across two ports, with the inlet of the device on port one (sensor 1) and the outlet of the device is connected to port two (sensor 2). The pass/fail limit is set as a min/max pressure value of the pressure required to open the device. The ‘trigger’ is the amount of pressure increase on the output side that constitutes an opening of the device. Sensor two can be either a pressure transducer or a mass flow transducer depending on the needs of the application.


To learn more about pressure cracking visit our Downloads page.

To learn more about our products visit our leak testers page!

See our Downloads page for a printable data sheets, catalogs, and manuals.

Download Page